State Metrological Control
Created on 19.06.2018 10:06
When using air navigation devices of the air traffic control system, the state metrological control is regularly carried out in order to verify compliance with the requirements of the laws of the Republic of Kazakhstan "On technical regulation", "On ensuring the unity of measurements", metrological rules and norms. The use of measuring instruments included in the state register of ensuring the unity of measurement of the Republic of Kazakhstan and passed periodic verification is one of the main conditions for ensuring a high level of safety. According to the results of the last inspection for compliance with the requirements of the legislation "On technical regulation", "On ensuring the unity of measuring instruments" in 2017, the operation of measuring instruments in the Kokshetau branch is carried out in accordance with the requirements of operating instructions (technical description, passport, etc.), metrological rules and norms. Violations of the Laws of the Republic of Kazakhstan "On technical regulation", "On ensuring the unity of measuring instruments" were not revealed.
For the great work carried out at the Metrology support, and contribution to the development of Metrology in the region to the world Metrology day 20 may 2018 Kokshetau branch was marked by RGU "Department of Committee of technical regulation and Metrology of Akmola region", and for the excellent work the honorary diploma was awarded are responsible for metrological assurance in the branch, engineer CROP service ERTOS Turks Alexey Vyacheslavovich.